9-12. AXLE NO. 4 ASSEMBLY REPLACEMENT (CONT).
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing.
To avoid injury or death, keep
away from open fire and use in well-
ventilated area. If
adhesive, solvent, or sealing
compound gets on skin or
clothing, wash immediately with
Driveshaft weighs up to 100 lbs
(45 kg). Properly support
driveshafts when removing
screws. After screws and
brackets are removed,
driveshafts can fall and cause
serious injury to personnel.
Coat threads of four screws (3) with sealing
Position driveshaft (2) in flange
Install two brackets (4) and four screws (3)
on flange assembly (5). Tighten screws 55 to
60 lb-ft (75 to 81 N.m).
Install shock absorbers, (TM 9-2320-364-20).
Fill axle oil, (TM 9-2320-364-20).
Align suspension, (Para 12-8).
Adjust brakes, (TM 9-2320-364-20).
Install wheels/tires, (TM 9-2320-364-10).
Remove wheel chocks, (TM 9-2320-364-10).
Check operations, (TM 9-2320-364-10).
END OF TASK