There are two tail light
assemblies. Left tail light shown.
With the aid of an assistant, remove two
locknuts (6), screws (7) and tail light
assembly (8) from bracket (9). Discard
Tie tail light assembly (8) up out of way to
frame (10) with cable ties.
Repeat Steps (5) and (6) for right tail light
Remove and discard cotter pin (11) from
castle nut (12).
Remove castle nut (12) from drag link (13).
It may be necessary to tap on
steering arm bracket with
hammer to remove drag link.
With the aid of an assistant, apply upward
pressure to draglink (13) and remove
draglink (13) from steering arm bracket (14).
Tie axle end of drag link (13) to frame (10)
with cable ties.