Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in well-
ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and
Coat mating surface of Axle No. 3
housing (2) with sealing compound.
Align matchmarks and install spindle (1) on
Axle No. 3 housing (2) with two screws (3).
Tighten screws 15 to 20 lb-ft (20 to 27 N.m).
Install axle air lines, (TM 9-2320-364-20).
Install brake assembly, (Para 10-2).
Remove wheel chocks, (TM 9-2320-364-10).
END OF TASK