Quantcast b. Installation. - TM-9-2320-364-34-2_958

Order this information in Print

Order this information on CD-ROM

Download in PDF Format

     

Click here to make tpub.com your Home Page

Page Title: b. Installation.
Back | Up | Next

Click here for a printable version

Google


Web
www.tpub.com

Home


   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Combat
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
USMC
   
Products
  Educational CD-ROM's
Printed Manuals
Downloadable Books
   

 

Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
Back
Remove flange assembly
Up
TM-9-2320-364-34-2 Palletized Load System (PLS) M1074/M1075 Manual
Next
c. Follow-On  Maintenance - TM-9-2320-364-34-2_959
TM 9-2320-364-34-2 9-124      9-18.  AXLE NO. 2, 3 AND 4 FLANGE ASSEMBLY AND OIL SEAL REPLACEMENT (CONT). b. Installation. (1) Coat sealing lip of oil seals (5) and (11) with grease. (2) Install oil seal (11) in cover (12). (3) Install dust cover (10) on flange assembly (9). NOTE Flange assembly should be positioned so large openings of flange assembly align with slots of pinion shaft. This will ease staking of nut. (4) Install flange assembly (9) on pinion shaft (8). (5) With the aid of an assistant and using flange holder and socket, install adjusting nut (7) on pinion housing (8).  Tighten adjusting nut 680 to 796 lb-ft (922 to 1079 N.m). (6) Install oil seal (5) on axle housing (6). (7) Install dust cover (4) on flange assembly (3). (8) Install flange assembly (3) on pinion shaft (2). Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors, and are harmful to skin and clothing.  To avoid injury or death, keep away from open fire and use in well-ventilated area.  If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately with soap and water. (9) Coat threads of pinion shaft (8) with adhesive. (10) Apply adhesive to face of flange assembly (3) where adjusting nut (1) seats. (11) With the aid of an assistant and using flange holder and socket, install adjusting nut (1) on pinion shaft (2).  Tighten adjusting nut to 680 to 796 lb-ft (922 to 1079 N.m). (12) Ensure adhesive has squeezed out around entire outside diameter of adjusting nut (1).  If adhesive is not visible around entire outside diameter of adjusting nut (1), remove and discard adjusting nut (1) and repeat Steps (9) through (11). (13) Stake adjusting nuts (1) and (7) in two slots of pinion shafts (2) and (8) directly 180 degrees apart.

Privacy Statement - Press Release - Copyright Information. - Contact Us - Support Integrated Publishing

Integrated Publishing, Inc.