|
| |
TM 9-2320-364-34-3
13-50
13-11. REAR CROSSMEMBER REPLACEMENT (CONT).
(6)
Position left brace (16) on left side frame (8)
with three screws (18) and locknuts (17).
(7)
Position left brace (16) on rear
crossmember (10) with three screws (12)
and locknuts (11).
(8)
Position right brace (4) on right side
frame (9) with four washers (15), two
screws (14) and locknuts (13).
(9)
Position right brace (4) on rear
crossmember (10) with three screws (12)
and locknuts (11).
(10)
Install eight washers (7), four screws (6)
and locknuts (5) in left side frame (8), right
side frame (9) and rear crossmember (10).
Tighten to 300 lb-ft (407 N.m).
(11)
Tighten six locknuts (21), four locknuts (19), three locknuts (17), two locknuts (13) and six locknuts (11)
on left side frame (8), right side frame (9) and rear crossmember (10).
|
