Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors,
and are harmful to skin and clothing. To avoid injury or death, keep away from open fire
and use in a well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or
clothing, wash immediately with soap and water.
Apply sealing compound to threads of screws (25).
Lower and upper spreader bar are installed the same way, upper one is shown.
Install washer (28), four washers (27), sleeve (26) and screw (25) in spreader bar assembly (29) and
power module frame (4). Tighten to 128 lb-ft (174 N.m).
Remove lifting device from power module frame (4).