|
| |
TM 9-2320-364-34-3
14-7
(9)
Remove locknut (18), screw (19) and
spacer (20) from brackets (21). Discard
locknut.
(10)
Using a lifting device, raise each frame rail (1) 4 to 6 in. (10 to 15 cm) to free each spring assembly (2)
from brackets (16) and (21).
(11)
Adjust stabilizer jack to support frame rails (1).
Front spring assembly weighs 208 lbs (94 kg). Rear spring assembly weighs 175 lbs (79 kg).
Attach a suitable lifting device prior to removal to prevent possible injury to personnel.
(12)
Attach lifting device to spring assembly (2).
(13)
Remove four nuts (22), eight washers (23), saddle cap (24), liner (25) and four screws (26) from
saddle (27).
(14)
Using a lifting device, remove spring assembly (2) from saddle (27) and lower spring assembly to ground.
(15)
Repeat Steps (1) through (15) for remaining spring.
|
