14-6. AXLE NO. 3 AIR SUSPENSION BEAM ASSEMBLY REPAIR (CONT).
Main fuel tank weighs 50 to 700
lbs (23 to 318 kg) depending on
the quantity of fuel inside.
Support main fuel tank with
suitable lifting device prior to
removing wood block to prevent
possible injury to personnel.
Steps (7) through (10) apply only
when installing left trailing beam.
Using a lifting device, raise right side of
main fuel tank (12) upward slightly and
remove wooden block.
Lower main fuel tank (12) onto fuel tank
Insert studs of two fuel tank straps (10)
through fuel tank brackets (11).
Position two washers (9) and locknuts (8).