|
| |
TM 9-2320-364-34-3
14-35
Trailing beam brackets can not be interchanged on trucks. The adjustment is different for
each truck.
NOTE
Steps (1) and (2) apply to left trailing beam mount removal only. Steps (3) and (4) apply to
right trailing beam mount removal only.
(1)
With the aid of an assistant, remove four locknuts (1) and screws (2) from trailing beam bracket (3) and
frame (4). Discard locknuts.
(2)
With the aid of an assistant, remove two locknuts (1) and screws (5) from trailing beam bracket (3) and
frame (4). Discard locknuts.
(3)
With the aid of an assistant, remove three locknuts (1) and screws (2) from trailing beam bracket (3).
Discard locknuts.
(4)
With the aid of an assistant, remove locknut (1) and screw (5) from trailing beam bracket (3) and
frame (4). Discard locknut.
Trailing beam bracket weighs 83 lbs (38 kg). Attach a suitable lifting device prior to
removal to prevent possible injury to personnel.
(5)
With the aid of an assistant, support trailing beam bracket (3) with a lifting device.
(6)
With the aid of an assistant, remove four locknuts (6), screws (7) and plate (8) from frame (4). Discard
locknuts.
(7)
Using a lifting device, lower trailing beam bracket (3) to ground.
|
