|
| |
TM 9-2320-364-34-3
14-39
(14)
With the aid of an assistant, slide trailing
beam (3) forward or backward until
distance “A” measures 32 1/2 in. 1/8 in.
(90 3.2 mm).
(15)
When distance “A” is attained, with the aid
of an assistant, tighten locknut (10) on
trailing beam (3) to 800 lb-ft (814 N.m).
Unsafe welding practices can
cause serious injury from fire,
explosions, or harmful agents.
Allow only authorized personnel
to weld or cut metals, and follow
safety precautions in TC 9-237.
Protective clothing and goggles
must be worn; adequate
protective equipment used, a
suitable fire extinguisher kept
nearby; and requirements of
TC 9-237 strictly followed.
(16)
Weld two adjustment collars to trailing
beam bracket (8) in accordance with
TC 9-237.
d.
Follow-On Maintenance:
Install inter-steering shaft, (Para 12-6) (left side only).
Install main fuel tank, (TM 9-2320-364-20) (left side only).
Install stowage box and stowage box bracket, (TM 9-2320-364-20) (right side only).
Install Axle No. 3 air suspension beam, (Para 14-6).
Align/adjust steering system, (Para 12-8).
Remove wheel chocks, (TM 9-2320-364-10).
END OF TASK
|
