Perform Steps (g)
through (j) only if truck
is equipped with self-
Self-recovery winch bracket
looks different for trucks
equipped with container
handling unit but procedures
are the same.
Apply grease to push pin (5).
Position roller (6) on self-recovery
winch bracket (3).
Install push pin (5) and locking
plate (4) in self-recovery winch
Install two screws (2) and locknuts (1)
in self-recovery winch bracket (3).
LHS in transit position, (TM 9-2320-364-10) (Axle No. 3 and 4 only).
Install rear hard lift, (TM 9-2320-364-20) (Axle No. 5 only).
Align/adjust steering system, (Para 12-8).
Remove wheel chocks, (TM 9-2320-364-10).
END OF TASK