|
| |
TM 9-2320-364-34-3
16-26
16-3. BOOM ASSEMBLY REPAIR (CONT).
(63)
With the aid of an assistant, position
structural section (91) on opposite side.
(64)
Remove two screws (124) and washers
(125) from bottom of chain clevis pins
(126).
(65)
Remove two pins (126) and clevis (127)
from structural section (91).
(66)
With the aid of an assistant, remove
equalizer link weldment (19), tube
weldment (128), chain assembly (102) and
cable (34) from structural section (91).
NOTE
Tag wear pads as to side and
extension. Note location and
quantity of any shims.
(67)
Remove screw (129) and remove top wear
pad (130) from tube weldment (128).
Discard wear pad.
(68)
Remove screw (131) and bottom wear
pad (132) from tube weldment (128).
(69)
Remove two screws (133), washers (134),
cable keeper plate (135) and cable (34)
from tube weldment (128).
NOTE
Tag wear pads as to side and
extension. Note location and
quantity of any shims.
(70)
Remove three screws (136), washers (137),
wear pad (138), shim (139), pins (140)
and (141), clevis (142) and chain
assembly (102) from tube weldment (128)
and equalizer link weldment (19). Discard
wear pad.
|
