|
| |
TM 9-2320-364-34-3
16-44
16-3. BOOM ASSEMBLY REPAIR (CONT).
Outer-mid section weighs 800 lbs (363 kg). Attach suitable lifting device prior to
installation to prevent possible injury to personnel.
(99)
Attach lifting device to inner-mid section (20).
(100)
With the aid of two assistants, route cable (8) through inner-mid section (20) while slowly installing
outer-mid section (40) into inner-mid section (20).
(101)
As cable (8) gets close to rear of inner-mid section (20), pull cable (8) through and route around
sheaves (52). Pull cable (8) and slowly slide into outer-mid section (40) until section is half installed.
|
