|
| |
TM 9-2320-364-34-3
16-62
16-5. ERECTION CYLINDER REPLACEMENT (CONT).
b.
Installation.
Erection cylinder weighs 78 lbs (35 kg). Attach suitable lifting device prior to installation to
prevent possible injury to personnel.
NOTE
Make sure pin is installed with lock pin holes aligned.
(1)
With the aid of an assistant and using lifting
in
turntable (18) with pin (17).
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in well-
ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and
water.
(2)
Apply sealing compound to threads of
screw (13).
(3)
Install lock pin (16) and bushing (15) with
washer (14) and screw (13). Tighten screw
to 135 lb-ft (183 N.m).
(4)
Position top of erection cylinder (6) in boom
base (11) and install pin (12).
(5)
Apply sealing compound to threads of two
screws (7).
(6)
Install lock pins (10) and bushings (9) with
two washers (8) and screws (7). Tighten
screws to 135 lb-ft (183 N.m).
(7)
Remove lifting device from erection
cylinder (6).
|
