Quantcast c. Cleaning/Inspection. - TM-9-2320-364-34-3_373

Order this information in Print

Order this information on CD-ROM

Download in PDF Format

     

Click here to make tpub.com your Home Page

Page Title: c. Cleaning/Inspection.
Back | Up | Next

Click here for a printable version

Google


Web
www.tpub.com

Home


   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Combat
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
USMC
   
Products
  Educational CD-ROM's
Printed Manuals
Downloadable Books
   

 

Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
Back
b. Disassembly - TM-9-2320-364-34-3_372
Up
TM-9-2320-364-34-3 Palletized Load System (PLS) M1074/M1075 Manual
Next
Install two relief valves
TM 9-2320-364-34-3      16-133 c. Cleaning/Inspection. Drycleaning Solvent (P-D-680) is TOXIC and flammable.  Wear protective goggles, face shield, and gloves; use only in a well-ventilated area; avoid contact with skin, eyes, and clothes, and do not breathe vapors.  Keep away from heat or flame.  Never smoke when using solvent. The flashpoint for Type II Drycleaning Solvent is 140 degrees F (60 degrees C) and Type III Drycleaning Solvent is 200 degrees F (93 degrees C).  Failure to do so may result in injury or death to personnel. If personnel become dizzy while using cleaning solvent, immediately get fresh air and medical help.  If solvent contacts skin or clothes, flush with cold water.  If solvent contacts eyes, immediately flush eyes with water and get immediate medical attention. (1) Clean all metal parts in drycleaning solvent. (2) Inspect each part for nicks, burrs, scratches or dents. (3) Replace damaged parts. d. Assembly. Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors, and are harmful to skin and clothing.  To avoid injury or death, keep away from open fire and use in well-ventilated area.  If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately with soap and water. (1) Apply sealing compound to threads of two plugs (15). (2) Install two ball bearings (17), seats (16) and plugs (15) in valve (2).

Privacy Statement - Press Release - Copyright Information. - Contact Us - Support Integrated Publishing

Integrated Publishing, Inc.
6230 Stone Rd, Unit Q Port Richey, FL 34668

Phone For Parts Inquiries: (727) 493-0744
Google +