Remove spacer (6), disc (7), spacer (8) and
disc (7) from swing drive assembly (5).
Drycleaning Solvent (P-D-680) is TOXIC and flammable. Wear protective goggles, face
shield, and gloves; use only in a well-ventilated area; avoid contact with skin, eyes, and
clothes, and do not breathe vapors. Keep away from heat or flame. Never smoke when
using solvent. The flashpoint for Type II Drycleaning Solvent is 140 degrees F (60 degrees
C) and Type III Drycleaning Solvent is 200 degrees F (93 degrees C). Failure to do so may
result in injury or death to personnel.
If personnel become dizzy while using cleaning solvent, immediately get fresh air and
medical help. If solvent contacts skin or clothes, flush with cold water. If solvent contacts
eyes, immediately flush eyes with water and get immediate medical attention.
Clean all metal parts in drycleaning solvent.
Dry parts with cleaning cloth.
Inspect each part for cracks, breaks, gouges, pitting and stripped threads.
Replace damaged parts.
Inspect spacer thickness. If spacers are under 0.225 in. (5.72 mm), replace spacer.
Inspect spacer thickness. If spacer is under 0.118 in. (3.00 mm), replace spacer.
Inspect disc thickness. If disc is under 0.21 in. (5.33 mm), replace disc.