|
| |
TM 9-2320-364-34-3
16-204
16-28. TWO FUNCTION CONTROL VALVE BANK REPAIR (CONT).
(8)
Install six shims (6), right outrigger valve (3)
and left outrigger valve (5) on manifold (4)
with three studs (2) and six nuts (1). Tighten
nuts evenly 20 to 23 lb-ft (27 to 31 N.m).
e.
Installation.
(1)
Apply hydraulic oil to four preformed
packings (39).
(2)
Install four preformed packings (39) and
fittings (37) in two function control valve
bank (34).
(3)
Apply hydraulic oil to preformed
packing (40).
(4)
Install preformed packing (40) and
fitting (38) in two function control valve
bank (34).
(5)
Apply hydraulic oil to preformed
packings (43) and (44).
(6)
Install preformed packings (43) and (44) and
elbows (41) and (42) in two function control
valve bank (34).
|
