|
| |
TM 9-2320-364-34-3
16-216
16-31. OUTRIGGER CYLINDER REPLACEMENT (CONT).
Outrigger cylinder weighs 115
lbs (52 kg). Attach suitable
lifting device prior to removal to
prevent possible injury to
personnel.
(4)
Position jack and wooden block under
cylinder (5) and raise cylinder to just touch
bottom of subframe barrel (6), until holes in
cylinder and barrel align.
NOTE
Do not discard cotter pins at this
time.
(5)
Remove two cotter pins (7) and pin (8).
(6)
Raise jack further, until hole in cylinder (5)
is above subframe barrel (6) and reinstall
pin (8) and cotter pins (7).
(7)
Attach lifting device to pin (8).
(8)
Operate lifting device to remove cylinder (5)
from subframe barrel (6).
(9)
Remove two cotter pins (7) and pin (8).
(10)
Remove lifting device and jack.
(11)
Repeat Steps (1) through (10) for other
outrigger cylinder.
|
