|
| |
TM 9-2320-364-34-3
16-283
NOTE
Only remove center screw on engine side of LHS control box cover.
(1)
Remove four screws (1), lockwashers (2) and cover (3) from LHS main manifold bracket assembly (4).
Discard lockwashers.
(2)
Remove locknut (5), screw (6) and cushion clip (7) from LHS main manifold bracket assembly (4).
Discard locknut.
(3)
Remove worklight (8) from LHS main manifold bracket assembly (4).
NOTE
Tag and mark wires prior to
removal.
(4)
Disconnect MC82 connector (9) and MC85
connector (10) from LHS main junction
box (11).
(5)
Disconnect MC59 connector (12) and MC73
connector (13) from EPAC controller (14).
(6)
Remove cotter pin (15), pin (16) and
clevis (17) from LHS main manifold bracket
assembly bracket (4). Discard cotter pin.
(7)
Position drain pan under LHS main
manifold bracket assembly (4).
|
