|
| |
TM 9-2320-364-34-3
17-8
17-2. MAIN HYDRAULIC PUMP REPAIR (CONT).
(18)
Open left cab door (56).
(19)
Attach chain to tiedown ring (57) and cable
winch (58) inside cab (59).
Main hydraulic pump weighs 215
lbs (98 kg). Attach suitable
lifting device prior to removal or
installation to prevent possible
injury to personnel.
(20)
Position lifting device around main
hydraulic pump (1).
(21)
Install cable of cable winch (58) to roof
mount pulley (51) by removing nut (60)
and lockwasher (61) from screw (62).
Discard lockwasher.
(22)
Position screw (62) until screw is flush
with left side of left pulley (63).
(23)
Position output cable of cable winch (58)
on right pulley (64) and return cable on left
pulley (63) on cable winch.
(24)
Attach end hook (65) of cable to eye (66)
of cable winch (58).
(25)
Attach free pulley hook (67) of cable
winch (58) to lifting device chain.
(26)
Install screw (62) with lockwasher (61) and
nut (60) to roof mount pulley (51).
(27)
Tighten cable of cable winch (58) until
slack is removed.
|
