|
| |
TM 9-2320-364-34-3
17-99
(2)
Install hydraulic return manifold (1) on
mounting bracket (19) with two screws (18)
and locknuts (17).
(3)
Apply hydraulic oil to preformed
packing (15).
(4)
Install preformed packing (15) and hose
2918 (14) on elbow (16).
(5)
Apply hydraulic oil to preformed
packing (12).
(6)
Install preformed packing (12) and hose
2886 (11) on adapter (13).
(7)
Apply hydraulic oil to preformed
packing (9).
(8)
Install preformed packing (9) and hose
2917 (8) on elbow (10).
(9)
Apply hydraulic oil to preformed
packing (6).
(10)
Install preformed packing (6) and hose
2724 (5) on adapter (7).
(11)
Apply hydraulic oil to preformed
packing (3).
(12)
Install preformed packing (3) and hose
2904 (2) on adapter (4).
e.
Follow-On Maintenance:
Install left rear fender skirt, (TM 9-2320-364-20).
Fill hydraulic reservoir, (TM 9-2320-364-20).
Start engine and run for 3 minutes, (TM 9-2320-364-10).
Shut OFF engine, (TM 9-2320-364-10).
Check for oil leaks, (TM 9-2320-364-10).
Remove wheel chocks, (TM 9-2320-364-10).
END OF TASK
|
