Machine gun ring front support weighs 55 lbs (25 kg). Attach suitable lifting device prior
to installation to prevent injury to personnel.
With the aid of an assistant, position two
spacers (16), front support (17), four
washers (18), screws (19) and locknuts (20)
on skid plate (21).
Position four screws (22), washers (23) and
locknuts (24) on front support (17).
Tighten four locknuts (20) on skid
Tighten four locknuts (24) on front
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors,
and are harmful to skin and clothing. To avoid injury or death, keep away from open fire
and use in a well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or
clothing, wash immediately with soap and water.
Apply sealing compound on threads of screw (25).
Position rear support (26) on power module right frame (27) using spacer (28), six washers (29) and