18-6. AUXILIARY FUEL TANK KIT INSTALLATION (CONT).
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in
well-ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and water.
Do not coat last two threads of
fittings with sealing compound.
Sealing compound will
contaminate fuel system and
cause damage to equipment.
Install elbows, reducers, adapter,
fuel shutoff valves and safety
valves as noted prior to removal.
Remove plug (59) from auxiliary fuel tank
(51), if present.
Coat threads of reducer (60) with sealing
Install reducer (60) on auxiliary fuel tank
Coat threads of elbow (61), adapter (62),
and safety valve (63) with sealing
Assemble elbow (61), fuel shutoff valve
(64), adapter (62) and safety valve (63).
Position fuel shutoff valve (64) between
two clamps (65) and install on fuel tank
guard (66) with four lockwashers (67) and