Position front end of driveshaft (5) on
yoke (3) of Axle No. 1 (4).
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in a well-
ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and
Apply sealing compound to threads of
Install two straps (2) and four screws (1) on
driveshaft (5) and yoke (3) of Axle No. 1
(4). Tighten screws to 60 lb-ft (81 N.m).
Install lateral torque rod (Axle No. 2), (Para 14-9).
Install service brake relay No. 1, (TM 9-2320-364-20).
Install left front fender skirt, (TM 9-2320-364-20).
Install right front fender skirt, (TM 9-2320-364-20).
Connect batteries, (TM 9-2320-364-20).
Remove wheel chocks, (TM 9-2320-364-10).
END OF TASK