Remote engine oil filter kit will
include longer screws for filter
head bracket. If longer screws
cannot be installed, existing
screws may be used.
Install filter head bracket (16) with two
screws (17) and locknuts (18) to hydraulic
pump support (15).
Position filter head (19) in soft jawed vise.
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in a
well-ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and water.
Ensure threads on adapters and
filter head bracket are clean and
free of oil and grease.
Apply sealing compound to threads of
adapter (20) and adapter (21).
Adapters are properly positioned
when facing away from filter
Install adapter (20) and adapter (21) in
filter head (19).
Remove filter head (19) from vise.
Install filter head (19) on filter head bracket
(16) with four screws (22) and locknuts (23).
Ensure hose 2830 is installed to
IN port of filter head and hose
2831 is installed to OUT port
of filter head.
Install hose 2830 (10) to adapter (20) and
hose 2831 (11) to adapter (21).