|
| |
TM 9-2320-364-34-3
18-156
18-13. CONTAINER HANDLING UNIT (CHU) KIT INSTALLATION (CONT).
Rear guide assembly weighs 70
lbs (32 kg). Attach suitable lifting
device to prevent possible injury
to personnel.
(67)
From CHU kit pallet, attach lifting device
to rear guide (103).
(68)
Install two short shafts (101) and short
rollers (102) into rear guide (103).
NOTE
Lock plates are properly installed
on inside of rear guide in slots of
roller shafts.
(69)
Install two lock plates (99), four screws
(97) and locknuts (98) on rear guide (103)
and two short shafts (101).
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in
well-ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and water.
(70)
Apply sealing compound (loctite 242) to
threads of screw (104).
(71)
Install screw (104) and axle stop (96) on
rear guide (103).
96
104
103
103
101
97
99
102
98
99
97
|
