|
| |
TM 9-2320-364-34-3
18-158
18-13. CONTAINER HANDLING UNIT (CHU) KIT INSTALLATION (CONT).
NOTE
Both rear splash guard
assemblies are removed the same
way unless noted. Right side
shown.
(78)
Remove two locknuts (112), screws (113)
and rear splash guard assembly (114) from
frame (27) and rear crossmember (115).
Discard locknuts and screws.
Rear roller bracket weighs 155
lbs (70 kg). Attach suitable lifting
device to prevent possible injury
to personnel.
(79)
Attach lifting device to rear roller bracket
(116).
NOTE
Perform Step (80) for right side
of truck only.
(80)
Remove locknut (117), two washers (118)
and screw (119). Discard locknut.
(81)
With the aid of an assistant, remove eight
locknuts (120), screws (121) and rear roller
bracket (116) from frame (27) and rear
crossmember (115). Discard locknuts,
screws and roller bracket.
(82)
Remove lifting device from rear roller
bracket (116).
(83)
Remove two locknuts (122) and screws
(123) from frame (27) and rear
crossmember (115). Discard locknuts and
screws.
(84)
Repeat Steps (78) through (83) for left side
of truck.
27
112
113
114
115
27
122
120
116
121
123
115
117
119
118
118
|
