Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in
well-ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and water.
Sealing compound is applied to
metallic side of thrust washer.
Apply sealing compound (loctite 680)
supplied in kit to thrust washers (160).
Apply adhesive (loctite 409) supplied in kit
to 6 points in recessed groove for
preformed packing (161).
Thrust washer is properly
installed with metallic side to
Install seal (162), preformed packing (161)
and thrust washer (160) on arm assembly
Apply grease, supplied in kit, to face of
seal (162), preformed packing (161), thrust
washer (160), and bore in large end of arm