Remove lifting device from lifting bracket
Remove two screws (163) and lifting
bracket (159) from right arm assembly
Install lifting bracket (159) on left arm
assembly (164) with two screws (163).
Repeat Steps (115) through (129) for left
side of truck.
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in
well-ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and water.
Pin bracket assemblies are in
pack no. 62 and 63 located in
bottom of CHU kit crate.
Hardware is in box D, pack
no. 26 of CHU kit crate.
Pin bracket assemblies, struts
and sliders are installed the
same way. Right side shown.
Apply sealing compound (loctite 242) to
threads of four screws (165).
With the aid of an assistant, install four
screws (165) and right pin bracket
assembly (166) on right arm assembly
(158). Tighten to 80 lb-ft (108 N.m).