| |
TM 9-2320-364-34-3
18-188
18-13. CONTAINER HANDLING UNIT (CHU) KIT INSTALLATION (CONT).
NOTE
Do not turn steering wheel with rear steering shaft disconnected, or if steering wheel is
turned, steering may need realignment.
(238)
Connect batteries (TM 9-2320-364-20).
(239)
Start engine and extend hook arm (77) fully to take tension off of pivot point (TM 9-2320-364-10).
Hook arm weighs 1,100 lbs (499 kg). Attach suitable lifting device to prevent possible
injury to personnel.
Ensure hook arm is supported with lifting device during installation to prevent possible
injury to personnel.
(240)
Attach lifting device to hook arm (77).
(241)
Ensure hook arm (77) is positioned fully to left side of truck. Use a pry bar if needed.
77
|