Install seal assemblies and ring as noted prior to removal.
Apply hydraulic oil to seal assemblies (21) and ring (20) and install on piston (22).
Place cylinder barrel (17) in chain vise with wooden blocks.
Install cylinder rod (3) in cylinder barrel (17).
Turn cylinder head (19) on cylinder rod (3) until setscrew holes are aligned.
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors, and
are harmful to skin and clothing. To avoid injury or death, keep away from open fire and use
in a well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing,
wash immediately with soap and water.
Apply sealing compound on threads of setscrew (16).
Install setscrew (16) in cylinder barrel (17).
Install wear ring (18) on cylinder barrel (17).