Quantcast APPENDIX D TORQUE LIMITS

Order this information in Print

Order this information on CD-ROM

Download in PDF Format

     

Click here to make tpub.com your Home Page

Page Title: APPENDIX D TORQUE LIMITS
Back | Up | Next

Click here for a printable version

Google


Web
www.tpub.com

Home


   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Combat
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
USMC
   
Products
  Educational CD-ROM's
Printed Manuals
Downloadable Books
   

 

Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
Back
Remove two nuts - TM-9-2320-364-34-4_69
Up
TM-9-2320-364-34-4 Palletized Load System (PLS) M1074/M1075 Manual
Next
Disconnect two injector wiring harness connectors
TM 9-2320-364-34-4 D-1 APPENDIX D TORQUE LIMITS D-1.  SCOPE. This section provides general torque limits for the screws, hoses and fittings used on the truck.  Special torque limits are listed in the maintenance procedures for applicable components.  The general torque limits given in this appendix shall be used when specific torque limits are not indicated in the maintenance procedure.  These general torque limits cannot be applied to screws that retain rubber components.  The rubber components will be damaged before the torque limit is reached.  If a special torque limit is not given in the maintenance instructions, tighten the screw or nut until it touches the metal bracket then tighten it one more turn. D-2.  TORQUE LIMITS. Table D-1 lists the torque limits for wet flange nuts.  Table D-2 lists the torque limits for wet socket head capscrews. Table D-3 lists dry torque limits for capscrews.  Dry torque limits are used on screws that do not have high pressure lubricants applied to the threads.  Table D-4 lists wet torque limits for capscrews.  Wet torque limits are used on screws that have high pressure lubricants applied to the threads.  Table D-5 lists the torque limits for SAE 37 degree flare hose connections.  Table D-6 lists the torque limits for SAE 45 degree flare hose connections.  Table D-7 lists the torque limits for ORS preformed packing face seal hose connections.  Table D-8 lists the torque limits for NPSM swivel connections. D-3.  HOW TO USE TORQUE TABLE. a. Screws and Nuts. (1) Measure the diameter of the screw installing with a ruler.

Privacy Statement - Press Release - Copyright Information. - Contact Us - Support Integrated Publishing

Integrated Publishing, Inc.
6230 Stone Rd, Unit Q Port Richey, FL 34668

Phone For Parts Inquiries: (727) 493-0744
Google +