|
| |
TM 9-2320-364-34-4
20-103
(29)
Apply lubricating oil to crankshaft front and
rear main bearing journals (29).
Crankshaft weighs 185 lbs
(84 kg). Attach suitable lifting
device prior to removal to
prevent possible injury to
personnel.
(30)
Attach lifting device to crankshaft (2).
(31)
With the aid of an assistant and a lifting
device, install crankshaft (2) in engine
block (11).
(32)
Push crankshaft (2) to front and install
thrust washer (23). Push crankshaft (2) to
rear and install remaining thrust
washer (23).
(33)
Install two bearing caps (12) and (13) and
bearing shells (15) on crankshaft (2).
(34)
Perform Steps (6) through (11).
(35)
Perform Steps (16) and (17). If crankshaft
runout is still too high, replace
crankshaft (2).
(36)
Perform Steps (18) through (35).
b.
Follow-On Maintenance:
Repair main bearing and crankshaft, (Para 20-63).
Repair cylinder block, (Para 20-64).
END OF TASK
|
