|
| |
TM 9-2320-364-34-4
20-104
Materials/Parts
Solvent, Drycleaning (Item 68, Appendix B)
Element (Item 42, Appendix E)
Gasket (Item 75, Appendix E)
Screw (6) (Item 526, Appendix E)
Seal (Item 568, Appendix E)
This task covers:
a. Disassembly
b. Cleaning/Inspection
c. Assembly
INITIAL SETUP
Equipment Condition
Rocker covers on clean surface.
Tools and Special Tools
Tool Kit, General Mechanic’s
(Item 240, Appendix F)
Compressor, Unit, Air (Item 35, Appendix F)
Gloves, Chemical Oil Protective
(Item 81, Appendix F)
Goggles, Industrial (Item 83, Appendix F)
Gun, Airblow (Item 86, Appendix F)
20-43. ROCKER COVER REPAIR.
a.
Disassembly.
(1)
Remove three screws (1) and rocker cover
retainer (2) from rocker cover (3). Discard
screws.
(2)
Remove element (4) and breather
retainer (5) from breather shell (6). Discard
element.
(3)
Remove breather shell (6) and seal (7) from
rocker cover (3). Discard seal.
NOTE
Filler cap is located on left
rocker cover only.
(4)
Remove filler cap (8) from rocker cover (3).
(5)
Remove chain hook (9) from filler cap (8).
(6)
Remove and discard three screws (10) from
strainer (11).
(7)
Remove strainer (11), filler cap tube (12)
and gasket (13) from rocker cover (3).
Discard gasket.
|
