|
| |
TM 9-2320-364-34-4
20-168
20-58. IDLER GEAR REPAIR (CONT).
Use extreme care when handling
idler gear bearings. Ensure
bearings do not get scratched or
damaged.
(3)
Position idler gear (3) in press with inner
bearing cone (4) supported on steel blocks.
Idler gear must be rotated during
removal to prevent damage to
bearing cones.
(4)
Rotate idler gear (3) while pressing idler
gear hub (5) out of bearing cones (4)
and (6).
(5)
Remove idler gear (3) as a unit from press.
(6)
Remove outer bearing cone (6), inner spacer
ring (7) and inner bearing cone (4) from
idler gear (3).
NOTE
Perform Step (7) only if bearing
cups are damaged.
(7)
Remove outer bearing cup (8), outer spacer
ring (9) and inner bearing cup (10) from
idler gear (3).
|
