|
| |
TM 9-2320-364-34-4
20-172
20-58. IDLER GEAR REPAIR (CONT).
(22)
Position idler gear (1) in vise with soft jaws.
(23)
Remove three screws (13), lockwashers (12), washers (11) and test fixture plate 3 from idler gear (1).
(24)
Remove nut (10), screw (9) and two test fixture plates 2 and 1.
(25)
Remove idler gear (1) from vise.
(26)
Install retainer (14) on idler gear (1) with
six screws (15). Tighten screws 24 to 29
lb-ft (33 to 39 N.m).
END OF TASK
|
