|
| |
TM 9-2320-364-34-4
20-254
20-73. CAMSHAFT ASSEMBLY INSTALLATION (CONT).
(21)
Position lockwashers (26) and (27) and nuts (28) and (29) on pulley (18) and gear (23).
(22)
Place clean cloth between bottom of camshaft gears (1) and (3).
(23)
Tighten right rear camshaft screw (30) 180 to 190 lb-ft (244 to 258 N.m).
(24)
Tighten left camshaft front nut (28) 300 to 325 lb-ft (407 to 441 N.m).
(25)
Place cloth between top of camshaft gears (1) and (3).
(26)
Tighten left camshaft rear nut (31) 300 to 325 lb-ft (407 to 441 N.m).
(27)
Tighten right camshaft front nut (29) 300 to 325 lb-ft (407 to 441 N.m).
|
