|
| |
TM 9-2320-364-34-4
21-32
21-3. TURBOCHARGER ASSEMBLY REPAIR (CONT).
(19)
Install turbine wheel assembly shaft (9) in
center housing (6).
(20)
Install impeller (11) on shaft (9).
(21)
Position locknut (10) on turbine wheel
assembly shaft (9).
(22)
Position impeller (11) in holding fixture.
(23)
With the aid of an assistant, hold
turbocharger holding fixture while
tightening locknut (10) to 135 lb-in
(15 N.m).
(24)
With the aid of an assistant, hold
turbocharger holding fixture while
removing locknut (10).
(25)
Apply grease to threads of turbine wheel
assembly shaft (9) and base of locknut (10).
(26)
With the aid of an assistant hold
turbocharger holding fixture so turbine
wheel assembly shaft (9) does not move,
and tighten locknut (10) 35 to 55 lb-in
(4 to 6 N.m).
(27)
Tighten locknut (10) on turbine wheel
assembly shaft (9) 1/4 turn more.
|
