|
| |
TM 9-2320-364-34-4
23-10
Materials/Parts
Oil, Hydraulic (Item 34, Appendix B)
Packing, Preformed (Item 369, Appendix E)
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Condition
Oil pan removed, (Para 23-3)
Tools and Special Tools
Tool Kit, General Mechanic’s
(Item 240, Appendix F)
Wrench, Torque (0-175 lb-ft [0-237 N.m])
(Item 277, Appendix F)
23-4. TRANSMISSION INTERNAL OIL FILTER ELEMENT REPLACEMENT.
NOTE
Model B replaces Model A.
For transmission serial numbers
under 2510187495, perform Step (2)
a.
Removal.
(1)
Remove screw (1), washer (2), filter
element (3), spacer (4) and preformed packing
(5) from transmission (6). Discard filter
element and preformed packing.
(2)
Inspect spacer (4) at flange. Discard model
A spacers.
b.
Installation.
(1)
Apply hydraulic oil to preformed
packing (5).
(2)
Install preformed packing (5) on filter
element (3).
(3)
Install washer (2) and screw (1) through
filter element (3) and spacer (4).
Do not twist filter element during
installation and ensure preformed
packing does not tear or become out of
place or damage to equipment could
result.
(4)
Install filter element (3) on transmission
(5). Tighten screw (1) to 17 to 20 lb-ft
(23 to 27 N.m).
c.
Follow-On Maintenance:
Install oil pan, (Para 23-3).
END OF TASK
MODEL
A
MODEL
B
.74 IN.
(1.88 CM)
FLANGE
FLANGE
2.165 IN.
(5.499 CM)
1.00 IN.
(2.54 CM)
2.165 IN.
(5.499 CM)
|
