|
| |
TM 9-2320-364-34-4
23-34
23-9. CONTROL VALVE ASSEMBLY REPAIR (CONT).
NOTE
Make sure solenoid priority
valve spring is solid red with blue
stripe.
(14)
Position control valve body flat side down on
clean work surface.
(15)
Install solenoid priority valve (46),
spring (47) and valve stop (44) in control
valve body (2).
(16)
Compress spring (47) and install retaining
pin (45) in control valve body (2).
NOTE
Make sure forward and reverse
spring is solid yellow with orange
stripe.
(17)
Install forward and reverse valve (42),
spring (43) and valve stop (40) in control
valve body (2).
(18)
Compress spring (43) and install retaining
pin (41) in control valve body (2).
NOTE
Make sure neutral range spring is
solid blue with yellow stripe.
(19)
Install neutral range valve (38), spring (39)
and valve stop (36) in control valve body
(2).
(20)
Compress spring (39) and install retaining
pin (37) in control valve body (2).
|
