|
| |
TM 9-2320-364-34-4
23-49
Materials/Parts
Grease (Item 21, Appendix B)
Oil, Hydraulic (Item 34, Appendix B)
Sealing Compound (Item 53, Appendix B)
Solvent, Drycleaning (Item 68, Appendix B)
Tags, Identification (Item 72, Appendix B)
Gasket (Item 64, Appendix E)
Lockwasher (14) (Item 237, Appendix E)
Packing, Preformed (2) (Item 352, Appendix E)
Pin, Lube Valve (Item 431, Appendix E)
Seal, Oil (Item 583, Appendix E)
Seal Ring (Item 608, Appendix E)
Seal Ring (2) (Item 614, Appendix E)
Spring, Converter By-pass Valve
(Item 669, Appendix E)
Spring, Lockup Shift Valve
(Item 670, Appendix E)
Spring, Lube Valve (Item 671, Appendix E)
Spring, Main Pressure Regulator Valve
(Item 672, Appendix E)
Valve, Lube (Item 686, Appendix E)
This task covers:
a. Removal
c. Cleaning/Inspection
e. Installation
b. Disassembly
d. Assembly
f. Follow-On Maintenance
INITIAL SETUP
Personnel Required
Two
Equipment Condition
Torque converter pump removed, (Para 23-11)
Tools and Special Tools
Tool Kit, General Mechanic’s
(Item 240, Appendix F)
Compressor Unit, Air (Item 35, Appendix F)
Compressor, Spring (Item 40, Appendix F)
Extractor, Inertial (Item 56, Appendix F)
Extractor, Inertial (Item 57, Appendix F)
Gage Set, Feeler (Item 67, Appendix F)
Gage, Center And Front (Item 70, Appendix F)
Gloves, Chemical Oil Protective
(Item 81, Appendix F)
Goggles, Industrial (Item 83, Appendix F)
Gun, Airblow (Item 86, Appendix F)
Hammer, Slide (Item 89, Appendix F)
Handle, Driver (Item 91, Appendix F)
Handle, Driver (Item 92, Appendix F)
Installer, Bearing (Item 107, Appendix F)
Installer, Seal (Item 115, Appendix F)
Pins, Guide Set (Item 147, Appendix F)
Pliers, Retaining Ring (Item 159, Appendix F)
Remover, Bearing (Item 186, Appendix F)
Remover, Valve Pin (Item 193, Appendix F)
Wrench Set, Socket 3/8 in.
(Item 273, Appendix F)
Wrench, Torque (0-60 N.m)
(Item 276, Appendix F)
Wrench, Torque (0 to 175 lb-ft [0-237 N.m])
(Item 277, Appendix F)
Lifting Device (Minimum capacity 200 lbs
[91 kg])
Adapter (Appendix C)
Wooden Block (2) (Appendix C)
Screws 5/8-11 by 2-1/2 in. (2) (MS90725-166)
23-12. TORQUE CONVERTER HOUSING REPAIR.
|
