|
| |
TM 9-2320-364-34-4
23-80
23-14. FIFTH CLUTCH REPAIR (CONT).
(4)
Position fifth clutch housing (2) in press.
(5)
Press spring retainer (7) with clutch spring
compressor until clear of retaining ring (8).
Use care when removing
retaining rings. Retaining rings
are under tension and can act as
projectiles when released causing
injury to personnel.
(6)
Remove retaining ring (8) from fifth clutch
housing (2).
(7)
Release pressure from press and remove
clutch spring compressor from fifth clutch
housing (2).
(8)
Remove spring retainer (7) and 20 piston
return springs (9) from piston (10). Discard
piston return springs.
(9)
Position fifth clutch housing (2) on wooden
blocks on level surface.
Use extreme caution when
dropping fifth clutch housing.
Keep feet and hands out from
under fifth clutch housing to
avoid injury to personnel.
(10)
Lift assembly one foot above wooden blocks
and drop on wooden blocks to loosen
piston (10) from fifth clutch housing (2).
(11)
Remove piston (10) from fifth clutch
housing (2).
(12)
Remove and discard seal (11) and
gasket (12) from fifth clutch housing (2).
|
