|
| |
TM 9-2320-364-34-4
23-86
23-14. FIFTH CLUTCH REPAIR (CONT).
(5)
Pack seal ring grooves in center support
hub (5) with grease.
When rolling up seal rings,
ensure not to spread seal rings
more than necessary to install on
hub or seal rings may leak and
clutch slippage may occur.
(6)
Roll up seals (4) to half its free diameter and
hold it that way for 10 seconds.
NOTE
Seal rings are installed on center
support hub by positioning one
end of seal ring into groove and
gradually working seal ring into
groove.
(7)
Install two seals (4) on center support
hub (5).
(8)
Install clutch lifting fixture on fifth clutch
assembly (1).
NOTE
Make sure teeth of all clutch
plates in transmission housing are
aligned before installing fifth
clutch assembly in transmission
housing.
(9)
Install fifth clutch assembly (1) in
transmission housing (2) while engaging
internal splines with splines on center sun
gear shaft (3).
(10)
Remove clutch lifting fixture from fifth
clutch assembly (1).
f.
Follow-On Maintenance:
Install forward clutch assembly,
(Para 23-13).
END OF TASK
|
