|
| |
TM 9-2320-364-34-4
23-93
b.
Disassembly.
Compressed air used for
cleaning purposes will not
exceed 30 psi (207 kPa). Use
only with effective chip guarding
and personal protective
equipment (goggles/shield,
gloves, etc). Failure to comply
may result in injury or death to
personnel.
(1)
Apply short bursts of compressed air to
second hole (1) from right to loosen fourth
clutch piston (2) from center support (3).
(2)
Remove fourth clutch piston (2) from center
support (3).
NOTE
Note direction lip of seal rings
face before removing. Lips are
facing away from springs.
(3)
Remove and discard preformed packings (4)
and (5) from fourth clutch piston (2).
(4)
Cut, remove, and discard four push-on
nuts (6) from fourth clutch piston (2).
(5)
Remove spring retainer plate (7) from fourth
clutch piston (2).
(6)
Remove and discard 20 piston release
springs (8) from fourth piston (2).
|
