|
| |
TM 9-2320-364-34-4
23-128
Materials/Parts
Cable Ties (Item 9, Appendix B)
This task covers:
a. Removal
c. Cleaning/Inspection
e. Installation
b. Disassembly
d. Assembly
f. Follow-On Maintenance
INITIAL SETUP
Equipment Condition
Rear transmission cover assembly removed,
(Para 23-18)
Tools and Special Tools
Tool Kit, General Mechanic’s
(Item 240, Appendix F)
Compressor Unit, Air (Item 35, Appendix F)
Gage Set, Feeler (Item 67, Appendix F)
Gloves, Chemical Oil Protective
(Item 81, Appendix F)
Goggles, Industrial (Item 83, Appendix F)
Gun, Airblow (Item 86, Appendix F)
Installer, Lock Ring (Item 109, Appendix F)
Pliers, Retaining Ring (Item 155, Appendix F)
Press, 60 Ton (Item 164, Appendix F)
23-19. FIRST CLUTCH AND ADAPTER HOUSING REPAIR.
Materials/Parts - Continued
Cloth, Cleaning (Item 11, Appendix B)
Oil, Hydraulic (Item 34, Appendix B)
Solvent, Drycleaning (Item 68, Appendix B)
Tags, Identification (Item 72, Appendix B)
Gasket (Item 108, Appendix E)
Nut, Push-on (4) (Item 312, Appendix E)
Seal Ring (Item 605, Appendix E)
Seal (Item 607, Appendix E)
Spring (28) (Item 664, Appendix E)
a.
Removal.
NOTE
Tie and mark clutch plates in
order of removal.
(1)
Remove ring gear (1), four external-tanged
clutch plates (2) and four internal-splined
clutch plates (3) from adapter housing (4).
(2)
Remove remaining five external-tanged
clutch plates (2) and four internal-splined
clutch plates (3) from adapter housing (4).
(3)
Remove adapter housing (4) from
transmission housing (5).
(4)
Position adapter housing (4) on level surface
piston side up.
(5)
Remove and discard gasket (6) from
transmission housing (5).
|
