|
| |
TM 9-2320-364-34-4
23-129
b.
Disassembly.
(1)
Remove second clutch piston (1) from
adapter housing (2).
NOTE
Note position of lips of seal rings.
Lips face away from springs and
will be installed in same position.
(2)
Remove and discard outer seal ring (3) and
inner seal (4) from second clutch piston (1).
Use extreme caution when
cutting retaining washers or
damage to parts may result.
(3)
Cut, remove and discard four push-on
nuts (5) from second clutch piston (1).
(4)
Remove spring retainer ring (6) from second
clutch piston (1).
(5)
Remove and discard 28 springs (7) from
second clutch piston (1).
NOTE
Perform Steps (6) and (7)
only if dowel pins and lube
orifice plug are damaged.
Dowel pins may have
remained in transmission
housing during removal of
adapter housing.
(6)
Remove dowel pins (8) and (9) from adapter
housing (2).
(7)
Remove lube orifice plug (10) from adapter
housing (2).
|
