20-2. INSTALLING ENGINE ON STAND (CONT).
With the aid of an assistant, install adapter plate with 13 screws (142) on engine (12). Tighten screws
35 lb-ft (47 N.m).
Engine weighs 2,600 lbs (1,180 kg). Attach suitable lifting device prior to removal to
prevent possible injury to personnel.
Keep out from under engine when lifting. If engine slips, sways, or falls, serious injury or
death may result.
Ensure lifting device is not resting on turbocharger air inlet when lifting engine to prevent
damage to inlet or turbocharger.
Ensure loose wires and hoses are secure and moved out of way so they do not snag and
cause damage when engine is lifted.
Install lifting hooks as shown. Before lifting engine completely off supports, test by lifting
slightly to see if balanced. If engine starts to tilt, lower and adjust chain lengths.
Unbalanced engine can swing causing damage.
Install lifting device on engine (12) at lift points (143).
With the aid of an assistant, install adapter plate to engine stand with six lockwashers (144) and
screws (145). Tighten screws 147 lb-ft (199 N.m).
Remove lifting device from engine (12).
Remove exhaust manifolds, (Para 20-3).
END OF TASK