Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in a well-
ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and
Coat pipe threads of fitting (30), strainer
(31) and adapter (29) with sealing
Install fitting (30), strainer (31) and
fitting (29) in rear housing (4).
Rear shaft assembly weights 100
lbs (45 kg). Attach suitable
lifting device before installation
to prevent possible injury to
Attach lifting eye and lifting device to rear
shaft assembly (18).
Apply sealing compound in
Apply sealing compound on rear housing (4)
around opening for rear shaft assembly (18).
Using lifting device, position rear shaft (18)
on rear housing (4).
Coat threads of six screws (19) with sealing
Install six lockwashers (20) and screws (19) in
rear housing (4). Tighten screws to 60 lb-ft
Remove lifting device and lifting eye from
rear shaft assembly (18).