|
| |
TM 9-2320-364-34-4
24-48
24-8. TRANSFER CASE ASSEMBLY REPAIR (CONT).
(139)
Coat inner surface of oil seal (87) with grease.
(140)
Install oil seal (87) on upper shift rod (16) in front housing (33).
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors, and
are harmful to skin and clothing. To avoid injury or death, keep away from open fire and use
in a well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing,
wash immediately with soap and water.
(141)
Coat threads of breather (89) and elbow (90)
with sealing compound.
(142)
Install elbow (90) in front housing (33).
(143)
Install breather (89) in elbow (90).
(144)
Coat inner lip of oil seal (81) with grease.
NOTE
Align inner lip of oil seal as
shown.
(145)
Install oil seal (81) in upper shaft bearing
cap (80).
d.
Follow-On Maintenance:
Install emergency steering pump, (Para 12-12).
Install lube pump, (Para 8-5).
Install yokes, (Para 24-7).
Install speedometer sensor, (Para 24-6).
Install shift connector, (Para 24-4).
Install neutral start switch, (Para 24-5).
Install lube hoses, (Para 24-3).
Remove transfer case from maintenance stand, (Para 24-2).
Install transfer case in container, (Para 8-6).
END OF TASK
|
