Adhesives, solvents and sealing
compounds can burn easily, can
give off harmful vapors and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in well-
ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and
Coat mating surface of ring gear carrier
assembly (8) with adhesive.
Install planetary gear carrier assembly (7) in
ring gear carrier assembly (8).
Coat protruding threads of eight studs (3)
Install eight washers (2) and locknuts (1)
on studs (3). Tighten locknuts to 38 to 45
lb-ft (52 to 61 N.m).
Install screw (6) in planetary gear carrier
assembly (7) and tighten until screw
bottoms out. Back screw off 3/4 of a turn.
Coat protruding threads of screw (6) with
Install nut (5) on screw (6). Tighten nut to
152 lb-ft (206 N.m).
Install axle air lines, (Para 25-30).
Install air brake chambers, (Para 25-4 or Para 25-5).
END OF TASK